Check out this Pivot Nozzle Video from HYDE

**Carlos** · 01-03-2010, 12:52 PM

Interesting...anyone use this?

http://www.hydetools.com/

**JCinNJ** · 01-03-2010, 01:17 PM

that does look cool but I have never used one

**Innovativewash** · 01-03-2010, 02:05 PM

Originally Posted by Carlos

Interesting...anyone use this?

http://www.hydetools.com/

This tool could come in handy.

**tegrey** · 01-04-2010, 10:27 AM

Looks like some good posibilities.

**PressurePros** · 01-04-2010, 10:54 AM

I have used it. I was going to write my review on it for Pressure Washing News but I didn't like the thing and the news went on hiatus so I held off. If Scott reopens the news, I'll post my article there.

**John Orr** · 01-04-2010, 10:10 PM

Northern Tool carries them in-store for about $79 on a wand in 3/8" and 25mm. I was planning on buying one, but I've been waiting for Ken's review!

**PressurePros** · 01-04-2010, 10:26 PM

Its unwieldy for lack of a better term. It has some advantages, but on high gpm machines every turn of the nozzle becomes like adjusting a water rocket. The jet wants to propel away from what you are spraying. Its fatiguing.

**GrimeBusters** · 01-04-2010, 10:31 PM

Looks interesting. Not sure how often it would come in handy. Someone have a reveiw to share ?

Found it on Amazon for cheap:

[ame]http://www.amazon.com/Hyde-28440-Nozzle-Pressure-Washer/dp/B002BZT9P4[/ame]

**Carlos** · 01-04-2010, 10:34 PM

Wonder if you could modify it someway to spray chems in hard to spray areas...such as Industrial Equipment like a D7 Dozer?

**Lenny Schrecengost** · 01-05-2010, 07:16 AM

Carlos,
The one for pressure washing that is in this months Cleaner Times uses a quick connect nozzel so you could just use a soap tip for the chemicals.